Gravel Calculator

Planning a path, patio or driveway? Enter the area and depth to see how many yards and tons of gravel to order.

Updated Nov 2026 Formula shown below Feet or meters
ft
Enter a number (0 or more)
ft
Enter a number (0 or more)
ft
Enter a number (0 or more)
in
Enter a number (0 or more)
Your prices (optional)
$/ ton
Enter a number (0 or more)
You'll need
–
rock solid estimate ✌

How to calculate how much gravel you need

Gravel is measured by volume but often sold by weight. First find the volume: multiply the length, width and depth, all in feet, to get cubic feet, then divide by 27 for cubic yards. To get tons, multiply the cubic yards by the weight of one yard of your stone.

Tons = Length (ft) × Width (ft) × (Depth in ÷ 12) ÷ 27 × Tons per yd³

For a round area, such as a fire pit circle, use π × radius² in place of length × width. A cubic yard of loose gravel typically weighs about 1.2 to 1.5 tons, depending on the stone, its size and how wet it is. This calculator uses the upper end of that range, so if you order by the ton you won't run short.

Pro tip!

Put down landscape fabric before the gravel on paths and patios. It stops the stone from sinking into the soil and slows down weeds, so the layer you paid for stays on top.

Worked example: a 12 × 12 ft pea gravel patio

Say you're building a square patio, 12 feet on each side, with a 3-inch layer of pea gravel.

  1. Find the area12 × 12 = 144 sq ft
  2. Convert the depth to feet3 ÷ 12 = 0.25 ft
  3. Multiply to get the volume144 × 0.25 = 36 cu ft
  4. Convert to cubic yards36 ÷ 27 = 1.33 yd³
  5. Multiply by the weight per yard1.333 × 1.4 = 1.87 tons
  6. Or count 0.5 cu ft bags36 ÷ 0.5 = 72 bags

Seventy-two bags is a lot of lifting, so for a job this size most people order bulk gravel instead.

How much does a yard of gravel weigh?

Gravel typeTypical weightNotes
Pea gravel1.4 tons/yd³ (1.66 t/m³)Smooth and rounded, shifts underfoot
Crushed stone1.5 tons/yd³ (1.78 t/m³)Angular, locks together when packed
River rock1.35 tons/yd³ (1.60 t/m³)Bigger stones leave more air gaps
Decomposed granite1.4 tons/yd³ (1.66 t/m³)Packs into a firm, natural surface

These are on the heavy side on purpose. Published figures for loose stone run lower, for example about 1.2–1.35 tons per yard for common #57 stone and bank-run gravel (Ohio DOT). Ask your supplier for the weight of their stone, and prices vary by region.

How deep should gravel be?

UseTypical depthNotes
Decorative cover in beds2 inOver landscape fabric
Walkway or garden path2–3 inOver firm, packed ground
Patio3–4 inEdging keeps it in place
Base for pavers or a shed4–6 inCompacted crushed stone
Driveway4–6 in or moreBuilt in layers, larger stone at the bottom

Soft or wet ground needs a deeper base. A local supplier can tell you what works in your soil.

Questions people ask

How many tons are in a cubic yard of gravel?

Typically about 1.2 to 1.5 tons for loose stone, depending on the type, size and moisture. This calculator uses 1.35–1.5 so you don't run short; your supplier can tell you the exact weight of their stone.

How much area does a ton of gravel cover?

A ton of pea gravel covers roughly 115 square feet at 2 inches deep, or about 77 square feet at 3 inches deep.

How many bags of gravel make a cubic yard?

54 bags of 0.5 cubic feet. A cubic yard is 27 cubic feet.

What gravel is best for a driveway?

Crushed stone, because its angular pieces lock together when compacted. Rounded pea gravel and river rock tend to roll and shift under tires.

Sources

The numbers in this calculator come from these manufacturer specs and public guides. Always check the label on the product you buy.

  1. Loose gravel and stone weigh about 2,400–2,700 lb per cubic yard — Ohio DOT
  2. 27 cubic feet per cubic yard; 2,000 lb per short ton — NIST Handbook 44, Appendix C
Was this calculator helpful?

Building a path or patio?

See all calculators