Mulch Calculator

How much mulch do you need for your beds? Enter the size and depth to get cubic yards, bags and cost.

Updated Nov 2026 Formula shown below Feet or meters
ft
Enter a number (0 or more)
ft
Enter a number (0 or more)
ft
Enter a number (0 or more)
in
Enter a number (0 or more)
Enter a number (0 or more)
Your prices (optional)
$each
Enter a number (0 or more)
$/ yd³
Enter a number (0 or more)
You'll need
–
three inches, not a volcano

How to calculate how much mulch you need

Mulch is sold by volume. Multiply the length of the bed by its width, in feet, to get the area. Multiply that by the depth in feet (inches ÷ 12) to get cubic feet. Divide by 27 to get cubic yards, the unit landscape suppliers use for bulk mulch.

Cubic yards = Length (ft) × Width (ft) × (Depth in ÷ 12) ÷ 27

For a round bed or a ring around a tree, use the area of a circle instead: π × radius². Bagged mulch is labeled in cubic feet, so divide your cubic feet by the bag size and round up to a whole bag.

Pro tip!

Keep mulch at least 6 inches away from tree trunks and a few inches from the stems of shrubs. A "mulch volcano" piled against the bark holds moisture there and can lead to rot.

Worked example: a 20 × 6 ft flower bed

Say you're mulching a bed along the front of the house. It's 20 feet long, 6 feet wide, and you want a 3-inch layer.

  1. Find the area of the bed20 × 6 = 120 sq ft
  2. Convert the depth to feet3 ÷ 12 = 0.25 ft
  3. Multiply to get the volume120 × 0.25 = 30 cu ft
  4. Convert to cubic yards30 ÷ 27 = 1.11 yd³
  5. Or count 2 cu ft bags30 ÷ 2 = 15 bags

So you need a little over one cubic yard, or 15 bags. Plug in your local prices above to see which way is cheaper.

How deep should mulch be?

Two to three inches suits most beds. A thinner layer lets weeds push through, while a much thicker one can keep the soil too wet and starve roots of air.

WhereTypical depthNotes
Flower and shrub beds2–3 inTop up as it breaks down
Around trees2–3 in (up to 4 on sandy soil)Keep it at least 6 in off the trunk
Paths3–4 inCoarse wood chips hold up best
Refreshing an old bed1–2 inLoosen the old layer first

Use the lower end for fine, shredded mulch and the higher end for coarse chips.

How many bags of mulch make a yard?

A cubic yard holds 27 cubic feet. Divide 27 by the bag size to see how many bags equal one yard of bulk mulch, and how far each bag goes.

Bag sizeBags per cubic yardOne bag covers at 3 in
1.5 cu ft (42 L)186 sq ft
2 cu ft (57 L)13.58 sq ft
3 cu ft (85 L)912 sq ft

Mulch prices vary by region and season. Enter your own bag and bulk prices to compare.

Questions people ask

How many bags of mulch are in a yard?

A cubic yard is 27 cubic feet, so it takes 13.5 bags of 2 cu ft, 9 bags of 3 cu ft or 18 bags of 1.5 cu ft.

How much area does a yard of mulch cover?

About 108 square feet at 3 inches deep, or 162 square feet at 2 inches deep.

Is bulk mulch cheaper than bags?

Per yard, bulk usually costs less, but delivery fees vary. For a small bed, bags can come out ahead. Enter your local prices in the calculator to compare.

Do I need to remove old mulch first?

Not always. If the old layer is thin, loosen it and top it up to 2–3 inches in total. If it is matted or already thick, rake some out before adding more.

Sources

The numbers in this calculator come from these manufacturer specs and public guides. Always check the label on the product you buy.

  1. Mulch 2–3 in deep on heavy soils, 3–4 in on well-drained sites — Iowa State Extension
  2. Keep organic mulch 3 in deep or less and off the trunk — University of Maryland Extension
  3. One cubic yard equals 27 cubic feet — NIST Handbook 44, Appendix C
Was this calculator helpful?

Sprucing up the whole yard?

See all calculators